Decibel Level - Sound Module & Sound Box
Please see the photos below of the decibel (dB) levels for a sound module and a soundBOX. Note that dB levels will vary in both cases depending on installation, the sound file loaded, etc.
Related Articles
Sound Module will not record, will not play, and appears dead
Please try the following and let us know the result: Make sure you remove the plastic tab from underneath the slider switch. Make sure there is no obstruction between the slider switch metal contacts. Clean off any debris if necessary. While laying ...Make volume louder (USB / DIY Modules)
On our sound modules, there no volume control on the module itself, or in the sound loader software. The only way to increase the volume is to amplify the sound file itself. If your sound is too soft, you can use sound editing software to adjust ..."Write SPI flash error" or Sound loader freezes when writing (USB / DIY Modules)
Errors: Write SPI flash Error... (Program freezes or hangs after the "write" button is clicked) Cause: Sampling Rate setting is set too high, or the sound file duration is too long. Remedy: Choose a lower sampling rate setting. Cut the sound file ...Sound Module Recording Instructions/Slider Install
After programming, module BEEPS when activated (USB / DIY Modules and tags, excluding soundBOX)
How to fix a USB/DIY module that BEEPS when activated. Did the sound loader software say "write success" (at the bottom of the window)? If not, please try programming again and ensure that the software says "write success" when finished. Does the ...