Make volume louder (USB / DIY Modules)

• Related Articles

• After programming, module BEEPS when activated (USB / DIY Modules and tags, excluding soundBOX)

  How to fix a USB/DIY module that BEEPS when activated. Did the sound loader software say "write success" (at the bottom of the window)?  If not, please try programming again and ensure that the software says "write success" when finished. Does the ...

• Error: USB device open failed / Cannot Start - Code 10 (USB / DIY Modules)

  Error Messages: USB device open failed. Assume 8Mbit SPI Flash size. Cannot start - Code 10 (Windows 8 or 10) Are you using Windows 8 or 10?  As mentioned in the listing and sound loader download page, some users have difficulties with certain ...

• "Write SPI flash error" or Sound loader freezes when writing (USB / DIY Modules)

  Errors: Write SPI flash Error... (Program freezes or hangs after the "write" button is clicked) Cause: Sampling Rate setting is set too high, or the sound file duration is too long. Remedy: Choose a lower sampling rate setting. Cut the sound file ...

• Decibel Level - Sound Module & Sound Box

  Please see the photos below of the decibel (dB) levels for a sound module and a soundBOX.  Note that dB levels will vary in both cases depending on installation, the sound file loaded, etc. ​

• When trying to upload or copy to a VIDEO unit your computer says "Not enough disk space..." or a similar message

  Delete all video files on the video unit (or microSD card) before copying or uploading your files.  The video unit is preloaded with test videos.  You may need to delete these videos first before copying or uploading your own files. If you still ...